18V ONE+ HP™ BRUSHLESS 165MM TRACK SAW (RPLS18X)

The RYOBI Track Saw comes with two supplied dust port adaptors for you to connect a dust extractor or workshop vacuum. The dust port adaptors come in sizes 32mm and 35mm. 

If your riving knife is worn, damaged or lost, you can purchase a replacement at Bunnings from the Special Orders Desk with part number 089240074113. 

At the base of the saw, there are two bevel adjustment knobs at the front and back of the saw that allow you to bevel from negative one to 48 degrees. 

To assemble the tracks for your RYOBI Track Saw, follow the instructional video, or steps outlined in the support article.

Learn how to safely change the blade on your Ryobi 18V ONE+ Circular Saw with this easy step-by-step guide. Follow proper safety precautions, engage the spindle lock, and correctly install the new blade to ensure smooth, accurate cutting performance.

Learn how to safely change the blade on your Ryobi Circular Saw with this clear, step-by-step guide. Follow essential safety tips, use the spindle lock correctly, and install your new blade properly to ensure accurate cuts and reliable performance.

With the battery removed, start by setting the depth control lever at the top of the saw all the way down to the blade change setting.

Adjust the depth control lever to the blade change position. Then locate the blade wrench from the rear of the saw, which is the larger of the two. Insert the wrench through the access hole in the side of guard and loosen the securing fastener.

Set the depth control lever to the plunge setting and adjust the depth of cut so that the teeth of the blade are exposed no more than 6mm below the bottom of the material. This allows for maximum cutting efficiency.

Set the depth control lever to the score cut setting and adjust the depth to the desired depth of cut. The blade is limited to a maximum depth of 6mm.

Set the depth control lever to the plunge setting and adjust the depth of cut so that the teeth of the blade are exposed no more than 6mm below the bottom of the material. This allows for maximum cutting efficiency. 

At the base of the saw, set the anti-tip adjustment knob to keep the saw from tipping over off the track when making bevel cuts.

Learn how to safely cut with your Ryobi 18V ONE+ Circular Saw using essential safety tips to reduce kickback, blade binding, and injury risk. Follow best practices for correct cutting depth, safe positioning, and proper handling to achieve smooth,…

Learn how to safely cut with your Ryobi Circular Saw using essential safety tips and best practices to reduce the risk of kickback and blade binding. Follow expert guidance on correct cutting depth, safe positioning, and proper handling to achieve…

Before making the first cut, you will need to trim the rubber track strip according to the kerf or thickness of your blade to ensure the highest cut accuracy. 

Find out why your RYOBI circular saw keeps cutting out with this easy step-by-step troubleshooting guide covering battery issues, power supply faults, overload protection, and overheating. Restore reliable performance from your Ryobi circular saw…