How to install or replace the blades on a RYOBI 18V Track Saw

Last update: 06/10/2023, 12:55

RPLS18X

Step	Action
1	With the battery removed, start by setting the depth control lever at the top of the saw all the way down to the blade change setting.
2	Then push the handle down to expose the blade screw in the side of the blade guard. You should feel it lock into place.
3	Locate the blade wrench from the rear of the saw, which is the larger of the two.
4	Then press and hold the spindle lock button.
5	Then use the wrench to remove the blade screw.
6	Carefully slide the blade into place. Then again, while holding the arbour lock down, fasten the arbour until it's firmly tightened.

How can we help?