How to perform rip cuts using a RYOBI Track Saw

Last update: 13/09/2023, 15:35

RPLS18X

Step	Action
1	First use clamps to secure the material checking the cutting line is clear of what you’re clamping to.
2	Then use the track clamp to secure the track to the material.
3	If not already, install the riving knife.
4	Set the depth control lever to the plunge setting and adjust the depth of cut so that the teeth of the blade are exposed no more than 6mm below the bottom of the material. This allows for maximum cutting efficiency.
5	Now secure the saw to the track and install the battery. Position the saw squeeze the trigger.
6	Allow the blade reach full speed before starting the cut.
7	And for safety once releasing the trigger, allowing the blade as to come to a complete stop before raising the blade out of the material.

How can we help?