How can we help?

• Sanders
• Belt Sanders
• Application

How to adjust a RYOBI Belt Sander's belt for tracking

To align the sanding belt, reconnect the power source. Firmly hold the sander away from your body, and turn the tool on. If the belt stays running in the centre of the backing plate you won’t need to make any alignment adjustments. But if you notice…

Last update: 29/08/2023, 12:21

• Sanders
• Belt Sanders
• Application

How to stop a RYOBI Belt Sander belt from coming off

Belt Sanders are made with an overlapping joint. Because of this, it's important to fit the belt in the right direction, otherwise it'll break at the join during use. 

Last update: 29/08/2023, 12:25

• Sanders
• Belt Sanders
• Application

Why does the sanding belt rub against the body of my Ryobi Sander?

The sanding belt needs alignment. To align the sanding belt, reconnect the power source. Firmly hold the sander away from your body, and turn the tool on. If the belt stays running in the centre of the backing plate you won’t need to make any…

Last update: 15/09/2022, 14:56

• Sanders
• Belt Sanders
• Application

What direction to fit the sanding belt on a RYOBI Belt Sander

On the inside of every belt, you’ll see directional arrows. Simply fit the belt in the same direction as the arrow on the side of the tool. The position of the arrow will vary between models.

Last update: 15/09/2022, 15:01

• Sanders
• Belt Sanders
• Troubleshooting

Why is the belt loose on my Ryobi Belt Sander?

If the belt is loose, even after you push back the tensioning lever of your Ryobi Belt Sander, it is most likely because the belt is too big. Belt Sanders come in several sizes - refer to your owner’s manual to know what size belt fits your model…

Last update: 15/09/2022, 15:05

• Sanders
• Belt Sanders
• Troubleshooting

Why does the motor of my Ryobi Belt Sander get hot?

This could be because the motor is getting hot due to blocks in the tools air vents, which are blocked up with sawdust. These are important for airflow that help keep the motor cool. And if they’re blocked up, it’s easy to clean them out with a…

Last update: 15/09/2022, 15:19

• Sanders
• Belt Sanders
• Troubleshooting

What's the burning smell coming from my electric Ryobi Belt Sander?

From new, electric motors will often have this smell which is normal and will go away after several uses of the tool. It can also occur with excessive use of the tool from extended use. All sanders are typically used for long periods and need a rest…

Last update: 15/09/2022, 15:38