How can we help?

• Heat Guns
• Heat Guns
• Troubleshooting

RYOBI Heat Gun won't heat up

If your RYOBI Heat Gun won't heat up, after turning it on, make sure you've allowed enough time for the gun to prepare itself - as the unit takes 1-2 minutes to heat up. If your Heat Gun is still not reaching the proper temperature, you may need to…

Last update: 12/08/2022, 11:03

• Heat Guns
• Heat Guns
• Troubleshooting

RYOBI Heat Gun won't turn on

If your RYOBI Heat Gun won't turn on, check the power outlet is working, ensure the plug is firmly plugged into the power outlet and untangle any knot on the power cord. You should also check your extension lead - make sure that extension leads with…

Last update: 11/08/2022, 10:41

• Heat Guns
• Heat Guns
• Troubleshooting

RYOBI Heat Gun is cutting out

If your RYOBI Heat Gun is cutting out, check if the plug of the unit is firmly plugged in, untangle any knot on the cord, and ensure the nozzle of the unit isn't too close to the heating surface and causing it to overheat. You should also check if…

Last update: 10/08/2022, 13:02

• Vacuum Cleaners
• Wet & Dry Vacuums
• Getting Started

How to use a RYOBI 30L M-Class Wet & Dry Vacuum's self-cleaning filter system

Discover the ultimate guide on harnessing the power of the RYOBI 30L M-Class Wet & Dry Vacuum's self-cleaning filter system.

Last update: 30/10/2023, 13:47

• Vacuum Cleaners
• Wet & Dry Vacuums
• Getting Started

How to use a RYOBI 30L M-Class Wet & Dry Vacuum's Power-Take-Off feature

The Power-Take-Off feature (PTO), allows you to connect suitable electric tools directly into the workshop vacuum's power outlet, while also being connected to the dust extraction hose. The tool you're connecting can't exceed 900 watts, which you…

Last update: 30/11/2022, 10:22

• Drills & Drivers
• Drill Drivers
• Getting Started

What are the settings for on my Ryobi Drill Driver?

The settings are to help with drilling holes & driving screws properly into the desired material.

Last update: 11/09/2024, 17:42

• Drills & Drivers
• Drill Drivers
• Maintenance

How to replace the Drill Chuck

ALWAYS disconnect the tool from power before starting. You will need a PH3 Screwdriver, a 10-13mm Allen key & a Rubber Mallet. To start, locate the internal screw within the centre of the Drill chuck.

Last update: 11/09/2024, 17:52