SEARCH
Enter keywords, product name, or question
| Step | Action |
|---|---|
| 1 | To initiate the self-cleaning filter system, move the on/off switch to the on position, and adjust the airflow speed control to max. |
| 2 | Insert the end of the hose directly into the self-cleaning button on the top of the vacuum. |
| 3 | Press the button all the way down four times to clean the filter. |
| Tip | Repeat the process two or three times to agitate the remaining dirt and debris in the filter. |
| 4 | The red LED will blink when suction is poor, indicating it's time to clean the filter or empty the collection bag - ignoring this for too long will result in a dirty filter, which reduces it's effectiveness. |
| 5 | To maintain maximum suction, regularly check the collection bag when it's full. |
| 6 | Give the inside of the collection tub a good wipe out of any residual dust not collected in the bag. |
RACWDV30MC
