17 Matching results
Can’t remove cutting disc from Angle Grinder
Typically, a cutting disc can be hard to remove because the locking nut was overtightened when fitted to the grinder. A disc will tighten under loading, so excessive tightening will cause issues with removal, that may require a pin spanner or wrench…
Last update: 01/08/2023, 11:27
How to fit a guard to a RYOBI Angle Grinder
It is important that the grinder is always used with a guard fitted, and (if included in your model) the additional clip-on guard if you are cutting. To fit the guard, place the guard on the grinder housing with the grooves aligned (arrow…
Last update: 11/08/2023, 15:29
What size disc is suitable for a RYOBI Angle Grinder?
For a RYOBI 125mm Angle Grinder, the maximum disc capacity is 125mm/5 inches, so you need a 125mm disc. For a RYOBI 115mm Angle Grinder, the maximum disc capacity is 115m, so you need a 115mm disc. Don’t use a disc larger than the maximum cutting…
Last update: 02/08/2023, 10:07
RYOBI battery-powered Nailer or Stapler doesn’t fire deep enough
If you find your nails don't fire deep enough or your brads aren't flush, try the following troubleshooting steps: Check the battery to ensure there’s enough charge (at least 2 bars on the battery fuel gauge). Check the power adjustment dial or…
Last update: 16/03/2023, 11:33
What nails, staple types or sizes can I use in a RYOBI Nailer or Stapler?
RYOBI Nailers and Staplers are designed for specific fasteners compatible to these RYOBI tools. Using incorrect sized fasteners will result in the tool jamming or breaking and voiding the warranty. Ensure the nails you use nails compatible with the…
Last update: 17/03/2023, 09:10
What battery is best to use with a RYOBI Nailer or Stapler?
The recommended battery for all Fastener tools is the RYOBI 18V ONE+ Compact 4.0AH Battery (RB1840C) – it has a good balance of power, runtime and weight. However any battery from the RYOBI ONE+ range is suitable. Just note that higher capacity…
Last update: 16/03/2023, 15:09
How to load nails into a RYOBI 18V 18ga Brad Nailer
Before you begin, make sure that you have 18ga C1 Brad Nails, as any other gauge will damage the Nailer. We recommend the PowerFit C1 Series Galvanised Brad Nails Project Pack - 4000 Pack. First, before loading nails into the magazine, remove the…
Last update: 16/03/2023, 11:02