How to load nails into a RYOBI 18V 18ga Brad Nailer

How to Load 18ga Brad Nails into Your Nailer
Before You Begin

• Use only 18-gauge C1 brad nails. 
• Remove the battery from the nailer before loading nails.
   

Loading Instructions
1.    Release the Magazine

• At the bottom of the magazine, press the toggle switch to unlock it.
   

2.    Open the Magazine

• Pull the magazine back to expose the nail track.
   

3.    Load the Nails

• Place the nails into the track with the points facing forward (toward the nozzle).
• Ensure the nails are aligned as far to the front as possible for proper feeding.
   

4.    Close the Magazine

• Slide the magazine forward until it clicks securely into place.