How can we help?

• Troubleshooting

Why is my RYOBI Thicknesser gouging the end of my timber?

The scalloping is known as "Snipe". It’s caused by the operator tilting the material at the beginning and/or at the end of the planing path. It's important to feed and support the timber as it exits the machine as parallel to the table. This is more…

Last update: 02/09/2022, 16:59

• Troubleshooting

Adjust cutting head of RYOBI Thickness Planer for even planing

With frequent use, Thicknessers will get a few knocks and bumps. Over time, this can result in the cutting head planing one side slightly higher, so you'll need to adjust the cutting head. To do so, first disconnect the power, remove the height…

Last update: 29/08/2023, 09:48

• Application

How do you replace the cutter blades in a RYOBI Thicknesser?

Eventually, the cutters will become dull, or they can become damaged over something like a nail in the timber passing through the RYOBI Thicknesser. In either case, the cutters need to be replaced, as original and replacement blades can't be…

Last update: 02/09/2022, 16:43

• Troubleshooting

Are RYOBI Thicknesser blades double sided/reversible?

The cutting blades that come with the tool are only single-sided, but the replacement ones are double-sided and can simply be flipped over when worn or damaged.

Last update: 02/09/2022, 16:44

• Troubleshooting

How do you remove the top cover of a RYOBI Thicknesser?

First disconnect the power, remove the height adjustment handle, and then the top and side covers by removing the screws with Allen keys. A 6mm Allan key is needed for the 4 top cover screws, the Allan key for the handle is supplied.

Last update: 02/09/2022, 16:47

• Hedge Trimmers
• Hedge Trimmers
• Troubleshooting

RYOBI Hedge Trimmer blades not cutting or getting jammed

If your RYOBI Hedge Trimmer Blade isn’t cutting or is getting jammed, your blades may need maintenance. Lubrication is required to keep the friction between the blades low to prevent excess heat.

Last update: 13/07/2023, 16:20

• Hedge Trimmers
• Hedge Trimmers
• Troubleshooting

What to do if your RYOBI Hedge Trimmer blades are sticking

If your Hedge Trimmer blades are sticking, clean the blades with a dry brush or cloth. You should also ensure blades are lubricated before and after every use, as this helps to clean off sticky material, like sap.

Last update: 20/09/2022, 15:57