8 Matching results
What size battery is recommended for a RYOBI Angle Grinder?
Cordless Angle Grinders are powerful tools that need lots of battery power. Grinding applications generally use more battery than cutting, so as a minimum, it’s recommended to use a 4.0ah battery or higher for optimum runtime and performance.
Last update: 11/08/2023, 14:59
Can I use a larger disc size with my RYOBI Angle Grinder?
Don’t use a disc larger than the maximum cutting capacity outlined below, as a larger disc can cause damage to the tool, and potentially harm you or a bystander. For a RYOBI 125mm Angle Grinder, the maximum disc capacity is 125mm/5 inches. For a…
Last update: 11/08/2023, 15:33
Do I need a spanner to remove the locking nut & disc from a RYOBI Angle Grinder?
For RYOBI Angle Grinders with a tool free locking nut, these models comes fitted with a tool free blade change nut referred to as a FixTec Locking Nut, which eliminates the need for a pin spanner. The Fix-tec nut also helps prevent overtightening,…
Last update: 11/08/2023, 15:41
Can I lock a RYOBI Angle Grinder’s switch/paddle on?
The paddle/ switch is not designed to be locked on – this is a safety measure to prevent the tool from working unintentionally. If this feature is not suitable for your application, then RYOBI also offer a 18V ONE+ 125mm Angle Grinder (R18AG1) with…
Last update: 01/08/2023, 09:59
How to fit & remove Angle Grinder disc using a pin spanner
If your RYOBI Angle Grinder has a pin spanner locking nut, you'll need a pin spanner to fit and remove the disc. Don’t attempt to remove the disc without one, as it may damage the spindle.
Last update: 29/08/2023, 13:19
How to fit & remove Angle Grinder disc using tool free locking nut
These instructions apply to RYOBI Angle Grinders with a tool free locking nut (FIXTEC). The locking nut will have a small tab to one side of the centre thread that can flip up, to help lever the locking nut on or off.
Last update: 29/08/2023, 13:18
How to fit a guard to a RYOBI Angle Grinder
It is important that the grinder is always used with a guard fitted, and (if included in your model) the additional clip-on guard if you are cutting. To fit the guard, place the guard on the grinder housing with the grooves aligned (arrow…
Last update: 11/08/2023, 15:29