How can we help?

• Vacuum Cleaners
• Wet & Dry Vacuums
• Getting Started

How to use a RYOBI 30L M-Class Wet & Dry Vacuum's self-cleaning filter system

Discover the ultimate guide on harnessing the power of the RYOBI 30L M-Class Wet & Dry Vacuum's self-cleaning filter system.

Last update: 30/10/2023, 13:47

• Vacuum Cleaners
• Wet & Dry Vacuums
• Getting Started

How to use a RYOBI 30L M-Class Wet & Dry Vacuum's Power-Take-Off feature

The Power-Take-Off feature (PTO), allows you to connect suitable electric tools directly into the workshop vacuum's power outlet, while also being connected to the dust extraction hose. The tool you're connecting can't exceed 900 watts, which you…

Last update: 30/11/2022, 10:22

• Drills & Drivers
• Drill Drivers
• Troubleshooting

Cannot tighten Drill Driver Bit in RYOBI Drill Driver chuck

Check that the chuck securing screw has potentially loosened – tighten clockwise with a matching bit (PH3 or Torx T30 usually) This occurs when Bits are dropped all the way into the bottom of the chuck.

Last update: 11/09/2024, 16:11

• Drills & Drivers
• Drill Drivers
• Getting Started

What are the settings for on my Ryobi Drill Driver?

The settings are to help with drilling holes & driving screws properly into the desired material.

Last update: 11/09/2024, 17:42

• Drills & Drivers
• Drills
• Troubleshooting

RYOBI Drill has no power or is losing power

Check the battery charge level – it is normal that a battery will lose some minor power output as the charge level drops. If the charge level is too low, the tool may stop under load. In this case you may need to charge your battery or change…

Last update: 11/09/2024, 12:17

• Drills & Drivers
• Drill Drivers
• Troubleshooting

RYOBI Cordless Drill Driver cutting out

Check that the Drill may is set on the correct drill or driving settings, the speed may be too high/ low, in reverse instead of forward, or the Adjustable clutch may not be set to the Drill mode (when drilling.) Generally, Slower the speed, the more…

Last update: 11/09/2024, 13:34

• Drills & Drivers
• Drill Drivers
• Troubleshooting

Drill Bits slip in RYOBI Drill Driver chuck

The Drill Bit may have dust or liquid on the Bit, which might cause it to slip - this can be prevented by cleaning the end of the Drill Bit that goes into the chuck.

Last update: 11/09/2024, 16:12