11 Matching results
How to fit or replace a belt on a RYOBI Belt Sander
Belt sanders use a sanding belt which must be fitted correctly. Belt sizes aren't interchangeable, so ensure you're using the correct size belt.
Last update: 18/09/2023, 16:16
How to adjust a RYOBI Belt Sander's belt for tracking
To align the sanding belt, reconnect the power source. Firmly hold the sander away from your body, and turn the tool on. If the belt stays running in the centre of the backing plate you won’t need to make any alignment adjustments. But if you notice…
Last update: 29/08/2023, 12:21
How to stop a RYOBI Belt Sander belt from coming off
Belt Sanders are made with an overlapping joint. Because of this, it's important to fit the belt in the right direction, otherwise it'll break at the join during use.
Last update: 29/08/2023, 12:25
Why does the sanding belt rub against the body of my Ryobi Sander?
The sanding belt needs alignment. To align the sanding belt, reconnect the power source. Firmly hold the sander away from your body, and turn the tool on. If the belt stays running in the centre of the backing plate you won’t need to make any…
Last update: 15/09/2022, 14:56
What direction to fit the sanding belt on a RYOBI Belt Sander
On the inside of every belt, you’ll see directional arrows. Simply fit the belt in the same direction as the arrow on the side of the tool. The position of the arrow will vary between models.
Last update: 15/09/2022, 15:01
Can you sander plasterboard with a Ryobi Belt Sander?
You can't sand plasterboard walls because Belt Sanders are too aggressive. Not only will they damage the surface itself, but the fine dust can damage the internal motor.
Last update: 15/09/2022, 15:30
What is the frame used for that came with my Belt Sander?
When fitted this controls the maximum depth you can sand using the depth control dial. It also assist you in sanding flat to the surface and prevent you from gouging in on the front wheel.
Last update: 24/08/2023, 14:14