18V ONE+ Stapler - Tool Only (R18ST50-0)

Before you begin, make sure you’re using T50 staples with a crown or width of approximately 10mm or 3/8 inches, as any other gauge or type will damage the stapler. We recommend 10mm T50 Staples. First, remove the battery from the Stapler before…

Regular basic maintenance will help provide trouble free operation. Collated nails and staples usually have glue on them to bind them together, which over time, can leave a residue on the magazine and the firing pin. To remove residue, disconnect…

The RYOBI 18V One+ Stapler is capable of driving staples into wood, upholstery (fabrics), plastics, paper/cardboard, carpet underlay, insultation and even to secure fencing wire and wire screen (with the right accessory). If you find your Crown…

If nails are not firing deep enough or brads are sitting flush with the surface, start by checking the battery. Use a battery with sufficient capacity—ideally 4Ah or higher—and ensure it has at least two bars on the fuel gauge for consistent power.…

RYOBI nailers and staplers are equipped with a line-lockout feature that helps prevent jamming when fasteners run low, typically when only a few nails or staples remain. If the tool stops firing, simply reload the magazine with additional fasteners…

The recommended battery for RYOBI fastener tools is the 18V ONE+ Compact 4.0Ah Battery (RB1840C), offering an ideal balance of power, runtime, and lightweight design. All RYOBI ONE+ batteries are compatible, with higher-capacity options delivering…

RYOBI nailers and staplers are built to work with specific compatible fasteners. Using incorrect nail or staple sizes can be unsafe, lead to jamming or tool damage, and may void the warranty. Always ensure fasteners meet your tool’s specifications,…

RYOBI nailers and staplers are built to work with specific compatible fasteners. Using incorrect nail or staple sizes can be unsafe, lead to jamming or tool damage, and may void the warranty. Always ensure fasteners meet your tool’s specifications,…