18V ONE+ HP™ Brushless Premium Hammer Drill Kit (R18XPD14)

Check that the chuck securing screw has potentially loosened – tighten clockwise with a matching bit (PH3 or Torx T30 usually) This occurs when Bits are dropped all the way into the bottom of the chuck.

The most common driver bit type is a Phillips Head or PH2 Driver Bit (a four-pointed star). Most commonly there will be a selection of Driver bits with different head types available to purchase.

A Hammer Drill is a lightweight all-rounder that is great for light masonry work while a Rotary Hammer Drill is a heavier drill designed for Drilling into solid concrete and re-enforced concrete.

The Drill Bit may have dust or liquid on the Bit, which might cause it to slip - this can be prevented by cleaning the end of the Drill Bit that goes into the chuck.

Check that the Drill may is set on the correct drill or driving settings, the speed may be too high/ low, in reverse instead of forward, or the Adjustable clutch may not be set to the Drill mode (when drilling.) Generally, Slower the speed, the more…

The chuck might have debris in the jaws, which could make adjusting the chuck harder or stiff. Open the chuck fully and clean out any build-up of dirt and dust - preferably with compressed air.

If your RYOBI Drill Driver has low or no power, first check the battery charge and ensure it is properly charged or swapped if needed. Confirm the drill is set to the correct mode, speed, and clutch setting, and that you are using the appropriate,…

Check the battery charge and replace or recharge if low. Ensure the drill is set to the correct mode, speed, and clutch setting, and use the right, sharp accessories. Low power can also result from overheating due to excessive load or prolonged use—…

If RYOBI Drill Driver stops while in use, check the battery charge and replace or recharge if low. Ensure the drill is set to the correct mode, speed, and clutch setting, and use sharp, suitable accessories. Overheating from excessive load can also…

If your RYOBI Drill has low or no power, check the battery and recharge or replace if needed. Ensure the drill is on the correct mode, speed, and clutch setting, and use sharp, appropriate accessories. Overheating from excessive load can also cause…

The settings are to help with drilling holes & driving screws properly into the desired material.

Select low speed for larger diameter Bits, and a high speed for smaller ones.

What RYOBI Drill Driver gear to use for hole saws

To drill into brick, make sure you’re using a RYOBI Drill with a hammer function, which you can identify by this symbol: