How can we help?

• Rotary Tools
• Rotary Tools
• Getting Started

How to Install Accessories from the Quick-Change Collet

To install your accessory, ensure the Rotary tool is off & disconnected from Power / remove Battery. Press and hold the spindle lock button and turn the shaft by hand until the spindle lock engages. With the spindle lock engaged, place the included…

Last update: 11/10/2024, 19:25

• Rotary Tools
• Rotary Tools
• Maintenance

How to Remove the Quick-Change Collet

To remove the quick-change collet completely from the tool, ensure the Rotary tool is off & disconnected from Power / remove Battery. Depress the spindle lock and use a wrench on the bottom hexed area. Turn the collet counterclockwise to loosen and…

Last update: 10/10/2024, 16:35

• Rotary Tools
• Rotary Tools
• Getting Started

How to Remove Accessories from the Quick-Change Collet

To remove your accessory, ensure the Rotary tool is off & disconnected from Power / remove Battery. Depress and hold the spindle lock. Turn the outer sleeve counterclockwise to loosen the inner collet off the bit. Then remove the bit. Remember, do…

Last update: 10/10/2024, 16:37

• Rotary Tools
• Rotary Tools
• Maintenance

How to Install the Quick-Change Collet

Ensure the Rotary tool is off & disconnected from Power / remove Battery. To install the quick-change collet onto the tool to press and hold the spindle Lock and thread the Collet clockwise by hand until you feel resistance. Then use a wrench on the…

Last update: 10/10/2024, 16:36

• Rotary Tools
• Rotary Tools
• Troubleshooting

Quick-change collet Outer Sleeve is too Loose / Tight

If you over tighten or over loosen the outer sleeve, depress and hold the spindle lock and use the wrench on the top hex area of the collet in either direction.

Last update: 10/10/2024, 16:37

• Rotary Tools
• Rotary Tools
• Troubleshooting

My Accessory is stuck In the Quick-change collet

If your accessory is stuck in the collet while the collar is in the open position, tap the accessory in to offset the friction and remove.

Last update: 10/10/2024, 17:05

• Rotary Tools
• Rotary Tools
• Troubleshooting

Removing a jammed accessory from the rotary tool

If the accessory cannot be released from the quick-change collet, turn the power off and remove from Power / disconnect the Battery. Then, press the spindle lock button and turn the quick-change collet clockwise by hand. Next, press the spindle lock…

Last update: 10/10/2024, 17:47