Removing a jammed accessory from the rotary tool

Last update: 10/10/2024, 17:47

Applicable Models

RRT130, RRT12, RRT18X, RRTS18, RRT4K, RRTCE16S4K

If the accessory cannot be released from the quick-change collet, perform the following steps:

  1. Turn the power off and remove from Power / disconnect the Battery.
  2. Press the spindle lock button. Turn the quick-change collet clockwise by hand.
    Removing a jammed accessory from the rotary tool_2
  3. Press the spindle lock button to lock. Turn the quick-change collet counterclockwise by hand until you hear a sound.
    Removing a jammed accessory from the rotary tool_3
  4. Position the wrench on the nut on top of the quick-change collet. Press the spindle lock button. Turn the nut counterclockwise to open the quick-change collet. Remove the accessory.
    Removing a jammed accessory from the rotary tool_4

 

Additional Support