72 Matching results
How to stop a RYOBI Belt Sander belt from coming off
Belt Sanders are made with an overlapping joint. Because of this, it's important to fit the belt in the right direction, otherwise it'll break at the join during use.
Last update: 29/08/2023, 12:25
Why does the sanding belt rub against the body of my Ryobi Sander?
The sanding belt needs alignment. To align the sanding belt, reconnect the power source. Firmly hold the sander away from your body, and turn the tool on. If the belt stays running in the centre of the backing plate you won’t need to make any…
Last update: 15/09/2022, 14:56
What direction to fit the sanding belt on a RYOBI Belt Sander
On the inside of every belt, you’ll see directional arrows. Simply fit the belt in the same direction as the arrow on the side of the tool. The position of the arrow will vary between models.
Last update: 15/09/2022, 15:01
Can you sander plasterboard with a Ryobi Belt Sander?
You can't sand plasterboard walls because Belt Sanders are too aggressive. Not only will they damage the surface itself, but the fine dust can damage the internal motor.
Last update: 15/09/2022, 15:30
How long can the RYOBI Belt Sander run continuously?
All sanders are typically used for long periods and need a rest every now and again to allow the motor to cool. Otherwise over time, it could eventually burn out. As an example, if you used the sander for 30min, give it say a 5-10min rest.
Last update: 15/09/2022, 15:16
How to adjust the support wheels position for a RYOBI 18V HP Garden Vacuum & Sweeper
To adjust the position of the support wheels on your RYOBI 18V HP™ Garden Vacuum & Sweeper, pull up the tab at the other end to the wheels will allow you to adjust the position of the wheels to best support the bottom of the tool.
Last update: 13/10/2022, 09:53
Detach RYOBI 18V Garden Vacuum & Sweeper motor from handle
To detach the motor from the handle, first loosen the safety pin about three quarters of the way. Then slide and hold this button to the unlock position as you twist the motor apart from the front handle. To refit the motor, line up the locating…
Last update: 29/08/2023, 10:48