7 Matching results
How to lock & unlock a RYOBI 210MM Compound Mitre Saw's handle
The RYOBI 1200W 210MM Compound Mitre Saw handle is locked down with a pin located on the right. To unlock the handle, pull down the handle and hold it there. Pull the locking pin all the way out. Slowly bring up the saw handle and then check it…
Last update: 13/09/2023, 10:48
RYOBI 210MM Compound Mitre Saw handle is jammed
If your RYOBI 1200W 210MM Compound Mitre Saw's handle is jammed, its possible the saw handle was pulled down or up with its locking pin not fully in or out and is now obstructing the movement. Check that the locking pin is correctly positioned…
Last update: 13/09/2023, 10:52
RYOBI 210MM Compound Mitre Saw handle won't move
If your RYOBI 1200W 210MM Compound Mitre Saw handle won't move up or down freely, don't force it as it can damage the tool. It's likely the locking pin isn't fully in or out, and is now obstructing movement. Check that the locking pin is correctly…
Last update: 13/09/2023, 10:51
Tools required to install RYOBI LINK to a plasterboard wall
Make sure you have the following tools to install the RYOBI LINK Wall.
Last update: 27/09/2023, 14:25
How to install RYOBI LINK rail to a plasterboard wall
Step-by-step instructions and a how-to video guide on how to install RYOBI LINK Rail/s on a plasterboard or brick wall.
Last update: 27/09/2023, 14:51
How much weight can RYOBI Link hold?
The LINK Rail supports 94kg overall for each rail or 34kg per 280mm. Overall holding weight varies depending on how the rail is fixed to the wall.
Last update: 27/09/2023, 14:53
Can’t tighten screw into anchor when installing RYOBI LINK
This can occur if a Drill Bit larger than 9mm was used & the hole is too big. The maximum Drill Bit & hole size for the RYOBI LINK Wall Anchors is 9mm.
Last update: 27/09/2023, 14:53