How can we help?

• Garden Cultivators
• Cultivators
• Troubleshooting

Why does my RYOBI Petrol/Battery Cultivator vibrate excessively when in use?

If your cultivator vibrates excessively when in use, apply a small amount of general-purpose grease to the non-powered drive shaft to ensure a smooth operation.

Last update: 20/09/2022, 14:59

• Garden Cultivators
• Cultivators
• Troubleshooting

How to stop RYOBI Petrol/Battery Cultivator cutting out

If your RYOBI Cultivator keeps cutting out while in use, ensure the soil conditions are suited to your cultivator. If your model is 18V & 36V Battery, ensure that your battery is sufficiently charged before use. If your model is petrol, make sure…

Last update: 20/09/2022, 15:00

• Nailers & Staplers
• Brad Nailers
• Troubleshooting

RYOBI battery-powered Nailer or Stapler doesn’t fire deep enough

If you find your nails don't fire deep enough or your brads aren't flush, try the following: Check the battery to ensure there’s enough charge (at least 2 bars on the battery fuel gauge). Check the power adjustment dial or switch that is on the back…

Last update: 17/09/2024, 18:50

• Nailers & Staplers
• Brad Nailers
• Getting Started

What nails, staple types or sizes can I use in a RYOBI Nailer or Stapler?

RYOBI Nailers and Staplers are designed for specific fasteners compatible to these RYOBI tools. Using incorrect-sized fasteners can be dangerous and will result in the tool jamming or breaking - voiding the warranty. Ensure the nails you used are…

Last update: 05/09/2024, 18:31

• Nailers & Staplers
• Brad Nailers
• Getting Started

What battery is best to use with a RYOBI Nailer or Stapler?

The recommended battery for all Fastener tools is the RYOBI 18V ONE+ Compact 4.0AH Battery (RB1840C) it has a good balance of power, runtime, and weight. However, any battery from the RYOBI ONE+ range is suitable. Just note that higher capacity…

Last update: 10/09/2024, 19:10

• Nailers & Staplers
• Framing Nailers
• Getting Started

Does the 18V ONE+ HP Brushless 30-34° Framing Nailer need air after unboxing?

The 18V ONE+ HP Brushless 30-34° Framing Nailer doesn’t need air when you take it out of the packaging. It’s ready to go straight out of the box.

Last update: 11/09/2024, 12:39

• Nailers & Staplers
• Framing Nailers
• Getting Started

What type & size nails are suitable for the 18V ONE+ HP Brushless 30-34° Framing Nailer?

For the 18V ONE+ HP Brushless 30-34° Framing Nailer, it’s recommended to only use framing nails. However, you can use any brand of nails as long as they are 10GA 30-34° type, with lengths ranging from 50mm to 90mm, and feature either smooth or ring…

Last update: 11/09/2024, 12:55