How can we help?

• Pressure Washers
• Pressure Washers
• Application

RYOBI Pressure Washer has low or no water pressure

Discover step-by-step solutions for fixing low or no water pressure issues in your RYOBI Pressure Washer.

Last update: 20/10/2023, 08:50

• Pressure Washers
• Pressure Washers
• Application

How to set up a RYOBI Pressure Washer

Before you start using your Pressure Washer, you have to prime the line. Ensure the machine is in the off position. Turn on the water supply. Squeeze the trigger until you see a night steady stream of water. Once achieved, the system is primed and…

Last update: 29/08/2023, 12:34

• Pressure Washers
• Pressure Washers
• Application

How to set RYOBI Pressure Washer to dispense soap

Depending on the Pressure Washer you own, the soap dispenser will be located in the front or back. If your Pressure Washer has a feed tube, it's important that when you put the cap back on, that the tube is pushed all the way to the bottom of the…

Last update: 29/08/2023, 12:37

• Nailers & Staplers
• Brad Nailers
• Getting Started

What nails, staple types or sizes can I use in a RYOBI Nailer or Stapler?

RYOBI Nailers and Staplers are designed for specific fasteners compatible to these RYOBI tools. Using incorrect-sized fasteners can be dangerous and will result in the tool jamming or breaking - voiding the warranty. Ensure the nails you used are…

Last update: 05/09/2024, 18:31

• Nailers & Staplers
• Brad Nailers
• Troubleshooting

RYOBI Nailer or Stapler work-contacting element doesn’t fully depress & won’t work

Ryobi Nailers and Staplers are commonly fitted with a line-lockout which prevents the tool from jamming when the nails are low (approximately when there's 5 nails left). If this occurs, replenish the magazine with more nails or staples.

Last update: 10/09/2024, 19:40

• Nailers & Staplers
• Brad Nailers
• Maintenance

How to maintain RYOBI Cordless Nailers & Staplers

Regular basic maintenance will help provide trouble free operation. Collated nails and staples usually have glue on them to bind them together, which over time, can leave a residue on the magazine and the firing pin. To remove residue, disconnect…

Last update: 11/09/2024, 11:02

• Nailers & Staplers
• Brad Nailers
• Troubleshooting

How to clear a jammed RYOBI battery-powered Nailer or Stapler

If your RYOBI Nailer or Stapler has a jammed nail or staple, try disconnect the Battery from the tool. Then, remove the nails or staples that aren’t jammed from the tool magazine, which takes the pressure off the jammed nail/staple. Pull up on the…

Last update: 17/09/2024, 18:47