9 Matching results
RYOBI battery-powered Nailer or Stapler doesn’t fire deep enough
If you find your nails don't fire deep enough or your brads aren't flush, try the following: Check the battery to ensure there’s enough charge (at least 2 bars on the battery fuel gauge). Check the power adjustment dial or switch that is on the back…
Last update: 17/09/2024, 18:50
What nails, staple types or sizes can I use in a RYOBI Nailer or Stapler?
RYOBI Nailers and Staplers are designed for specific fasteners compatible to these RYOBI tools. Using incorrect-sized fasteners can be dangerous and will result in the tool jamming or breaking - voiding the warranty. Ensure the nails you used are…
Last update: 05/09/2024, 18:31
What battery is best to use with a RYOBI Nailer or Stapler?
The recommended battery for all Fastener tools is the RYOBI 18V ONE+ Compact 4.0AH Battery (RB1840C) it has a good balance of power, runtime, and weight. However, any battery from the RYOBI ONE+ range is suitable. Just note that higher capacity…
Last update: 10/09/2024, 19:10
RYOBI Nailer or Stapler work-contacting element doesn’t fully depress & won’t work
Ryobi Nailers and Staplers are commonly fitted with a line-lockout which prevents the tool from jamming when the nails are low (approximately when there's 5 nails left). If this occurs, replenish the magazine with more nails or staples.
Last update: 10/09/2024, 19:40
How to maintain RYOBI Cordless Nailers & Staplers
Regular basic maintenance will help provide trouble free operation. Collated nails and staples usually have glue on them to bind them together, which over time, can leave a residue on the magazine and the firing pin. To remove residue, disconnect…
Last update: 11/09/2024, 11:02
How to clear a jammed RYOBI battery-powered Nailer or Stapler
If your RYOBI Nailer or Stapler has a jammed nail or staple, try disconnect the Battery from the tool. Then, remove the nails or staples that aren’t jammed from the tool magazine, which takes the pressure off the jammed nail/staple. Pull up on the…
Last update: 17/09/2024, 18:47
How to load narrow Crown Staples into a RYOBI 18ga Narrow Crown Stapler
To load narrow Crown Staples into a RYOBI 18ga Narrow Crown Stapler, first make sure that you have 18ga Narrow Crown Staples as any other gauge or type will damage the Stapler. We recommend the PowerFit 6000 Series Narrow Crown Project Pack Staples …
Last update: 16/03/2023, 15:15