11 Matching results
RYOBI Brad Nailer Brads aren’t flush
The driving depth of the fastener may need to be adjusted. Test the depth on a scrap workpiece to determine the required depth for the application. To determine depth of drive, adjust the air pressure on the tool by rotating the dial on the back of…
Last update: 16/03/2023, 11:20
RYOBI Brad Nailer jamming
It's likely a jammed fastener - disconnect the air hose to remove the jammed fastener. Additionally, always ensure the correct gauge of nails is being used, and check the nails are straight and in condition.
Last update: 08/08/2022, 16:38
RYOBI Airwave/Pneumatic Brad Nailer doesn't fire deep enough
If your RYOBI Airwave/Pneumatic Brad Nailer doesn't fire deep enough and the fastener is protruding, increase the air pressure by increments of 0.5 bar, checking the result after each new adjustment. It is preferred to adjust the depth adjustment…
Last update: 16/03/2023, 14:26
What to do if your RYOBI Shredder has stopped working
If your RYOBI Shredder stopped working, the chute may be blocked by debris – unplug the unit and clear the blockage. Also, check if the circuit breaker is overloaded.
Last update: 29/08/2022, 11:44
What to do if your RYOBI Shredder is low on power
Your RYOBI Shredder may be low on power if you’re using too many extension leads or a lead that is too long. It’s recommended to use a heavy-duty extension lead no longer than 25m.
Last update: 30/08/2022, 08:27
RYOBI Hedge Trimmer blades not cutting or getting jammed
If your RYOBI Hedge Trimmer Blade isn’t cutting or is getting jammed, your blades may need maintenance. Lubrication is required to keep the friction between the blades low to prevent excess heat.
Last update: 13/07/2023, 16:20
What to do if your RYOBI Hedge Trimmer blades are sticking
If your Hedge Trimmer blades are sticking, clean the blades with a dry brush or cloth. You should also ensure blades are lubricated before and after every use, as this helps to clean off sticky material, like sap.
Last update: 20/09/2022, 15:57