How can we help?

• Nailers & Staplers
• Brad Nailers
• Troubleshooting

RYOBI Brad Nailer not firing or is misfiring

Disconnect the tool from the air supply before any checks and keep the tool pointed away from you. Check if there are fasteners in the magazine by dislodging the magazine latch and inspecting it. Ensure the correct gauge nails for the Nailer are…

Last update: 05/09/2024, 13:07

• Nailers & Staplers
• Brad Nailers
• Troubleshooting

RYOBI Brad Nailer Brads aren’t flush

The driving depth of the fastener may need to be adjusted. Test the depth on a scrap workpiece to determine the required depth for the application. To determine depth of drive, adjust the air pressure on the tool by rotating the dial on the back of…

Last update: 05/09/2024, 13:40

• Nailers & Staplers
• Brad Nailers
• Troubleshooting

RYOBI Brad Nailer jamming

Disconnect the tool from the air supply before any checks and keep the tool pointed away from you. Always ensure the correct gauge of nails is being used. We also recommend you confirm the angle required for collation nails matches that of the Nail…

Last update: 17/09/2024, 18:52

• Nailers & Staplers
• Brad Nailers
• Troubleshooting

RYOBI Airwave/Pneumatic Brad Nailer doesn't fire deep enough

If the fastener is protruding, increase the air pressure by increments of 0.5 bar, checking the result after each new adjustment. It is preferred to adjust the depth adjustment knob to reach the preferred fastening effect. The amount of air pressure…

Last update: 05/09/2024, 16:43

• Blowers & Garden Vacuums
• Leaf Blowers
• Troubleshooting

What to do if 18V or 36V RYOBI Blower doesn't work

First remove and reinsert the battery to ensure that it’s seated properly in the Blower. If this doesn’t work, check the battery charge level by pushing the battery indicator button.

Last update: 14/07/2023, 11:04

• Power Saws
• Mitre Saws
• Application

How to lock & unlock a RYOBI Dual Bevel Sliding Mitre Saw's handle

The saw handle is locked down with a pin located on the right. 3To unlock the saw, pull down the handle and hold it there. Pull the locking pin all the way out.

Last update: 13/09/2024, 09:52

• Power Saws
• Mitre Saws
• Troubleshooting

RYOBI Dual Bevel Sliding Mitre Saw handle is jammed

Its possible the saw handle was pulled down or up with its locking pin not fully in or out and is now obstructing the movement. Check the pin is correctly positioned.

Last update: 13/09/2024, 09:45