How can we help?

Disconnect the tool from the air supply before any checks and keep the tool pointed away from you.

• Check if there are fasteners in the magazine by dislodging the magazine latch and inspecting it.
• Ensure the correct gauge nails for the Nailer are being used. Most Nailers will use a specific type of nails and cannot run on multiple different sizes.
• Check for any jams. In the event of a jam, open the magazine, remove all the nails, and use a flat head screwdriver or pointed pliers to remove the jammed nail.
• Check that the air supply is attached correctly to the tool to ensure the tool is supplied with the correct amount of Air.

If the issue isn’t resolved and it’s still within the warranty period, return it to Bunnings, along with your receipt or proof of purchase, for warranty assessment.