17 Matching results
Product Safety Recall Airwave 2-in-1 C1 Brad Nailer/Stapler RA-NBS1832-S
The product that is the subject of the recall is the RYOBI RA-NBS1832-S Airwave 2-in-1 C1 Brad Nailer/Stapler. The Product has been sold through Bunnings retailers throughout Australia from 1 October 2021 – 31 March 2024. Affected products will…
Last update: 20/05/2024, 16:11
RYOBI Airwave/Pneumatic Brad Nailer doesn't fire deep enough
If your RYOBI Airwave/Pneumatic Brad Nailer doesn't fire deep enough and the fastener is protruding, increase the air pressure by increments of 0.5 bar, checking the result after each new adjustment. It is preferred to adjust the depth adjustment…
Last update: 16/03/2023, 14:26
What to do if your RYOBI Shredder has stopped working
If your RYOBI Shredder stopped working, the chute may be blocked by debris – unplug the unit and clear the blockage. Also, check if the circuit breaker is overloaded.
Last update: 29/08/2022, 11:44
What to do if your RYOBI Shredder is low on power
Your RYOBI Shredder may be low on power if you’re using too many extension leads or a lead that is too long. It’s recommended to use a heavy-duty extension lead no longer than 25m.
Last update: 30/08/2022, 08:27
How to assemble the track for a RYOBI 18V Track Saw
To assemble the tracks for your RYOBI Track Saw, follow the instructional video, or steps outlined in the support article.
Last update: 06/10/2023, 12:55
How to install or replace the blades on a RYOBI 18V Track Saw
With the battery removed, start by setting the depth control lever at the top of the saw all the way down to the blade change setting.
Last update: 06/10/2023, 12:55
How to install the riving knife to a RYOBI 18V Track Saw
Adjust the depth control lever to the blade change position. Then locate the blade wrench from the rear of the saw, which is the larger of the two. Insert the wrench through the access hole in the side of guard and loosen the securing fastener.
Last update: 06/10/2023, 12:58