10 Matching results
Product Safety Recall Airwave 2-in-1 C1 Brad Nailer/Stapler RA-NBS1832-S
The product that is the subject of the recall is the RYOBI RA-NBS1832-S Airwave 2-in-1 C1 Brad Nailer/Stapler. The Product has been sold through Bunnings retailers throughout Australia from 1 October 2021 – 31 March 2024. Affected products will…
Last update: 20/05/2024, 16:11
RYOBI Airwave/Pneumatic Brad Nailer doesn't fire deep enough
If your RYOBI Airwave/Pneumatic Brad Nailer doesn't fire deep enough and the fastener is protruding, increase the air pressure by increments of 0.5 bar, checking the result after each new adjustment. It is preferred to adjust the depth adjustment…
Last update: 16/03/2023, 14:26
Why does my RYOBI Petrol/Battery Cultivator vibrate excessively when in use?
If your cultivator vibrates excessively when in use, apply a small amount of general-purpose grease to the non-powered drive shaft to ensure a smooth operation.
Last update: 20/09/2022, 14:59
How to stop RYOBI Petrol/Battery Cultivator cutting out
If your RYOBI Cultivator keeps cutting out while in use, ensure the soil conditions are suited to your cultivator. If your model is 18V & 36V Battery, ensure that your battery is sufficiently charged before use. If your model is petrol, make sure…
Last update: 20/09/2022, 15:00
RYOBI Hedge Trimmer blades not cutting or getting jammed
If your RYOBI Hedge Trimmer Blade isn’t cutting or is getting jammed, your blades may need maintenance. Lubrication is required to keep the friction between the blades low to prevent excess heat.
Last update: 13/07/2023, 16:20
What to do if your RYOBI Hedge Trimmer blades are sticking
If your Hedge Trimmer blades are sticking, clean the blades with a dry brush or cloth. You should also ensure blades are lubricated before and after every use, as this helps to clean off sticky material, like sap.
Last update: 20/09/2022, 15:57
What to do if your RYOBI Hedge Trimmer cuts out
If your RYOBI Hedge Trimmer cuts out, the material being cut may be too thick. Check your Hedge Trimmer’s maximum cut capacity.
Last update: 20/09/2022, 15:58