7 Matching results
Product Safety Recall Airwave 2-in-1 C1 Brad Nailer/Stapler RA-NBS1832-S
The product that is the subject of the recall is the RYOBI RA-NBS1832-S Airwave 2-in-1 C1 Brad Nailer/Stapler. The Product has been sold through Bunnings retailers throughout Australia from 1 October 2021 – 31 March 2024. Affected products will…
Last update: 20/05/2024, 16:11
RYOBI Airwave/Pneumatic Brad Nailer doesn't fire deep enough
If your RYOBI Airwave/Pneumatic Brad Nailer doesn't fire deep enough and the fastener is protruding, increase the air pressure by increments of 0.5 bar, checking the result after each new adjustment. It is preferred to adjust the depth adjustment…
Last update: 16/03/2023, 14:26
Why can't I pull my Petrol RYOBI Pole Pruner starter cord?
If your pull cord can't be pulled, the engine may have seized. This is caused by the fuel mixture being incorrect and having a lack of oil to lubricate the motor. Ryobi chainsaws run off a 50:1 ratio, this means 50 parts unleaded fuel to 1 part 2…
Last update: 20/09/2022, 14:47
RYOBI Petrol Pole Pruner hard to start/doesn’t run correctly
If your RYOBI Pole Pruner is hard to start or doesn't run correctly, make sure you're starting the chainsaw correctly. It may also be a flooded engine, which can prevent a chainsaw from starting. A flooded engine means there is excessive fuel pumped…
Last update: 20/09/2022, 14:47
How to lock & unlock a RYOBI 18V ONE+ 184mm Mitre Saw's handle
To unlock the handle of a 18V ONE+ 184mm Mitre Saw, pull down the handle and hold it there. The saw handle is locked down with a pin located on the right. Then pull the locking pin all the way out. Slowly bring up the saw handle and then check it…
Last update: 13/09/2023, 10:46
Fix a RYOBI 18V ONE+ 184mm Mitre Saw's jammed handle
If your RYOBI 18V ONE+ 184mm Mitre Saw has a jammed handle, it's possible the saw handle was pulled up or down with it's locking pin not fully in our out and is now obstructing movement. Check that the locking pin is correctly positioned either…
Last update: 13/09/2023, 10:42
RYOBI 18V ONE+ 184mm Mitre Saw's handle won't move
If your RYOBI 18V ONE+ 184mm Mitre Saw handle won't move up or down freely, don't force it as it can damage the tool. It's likely the locking pin isn't fully in or out, and is obstructing movement. Check that the locking pin is correctly positioned…
Last update: 13/09/2023, 10:44