10 Matching results
RYOBI Multi Tool sparking when turned on
Sparking can occur on new, brushed motor tools due to the brushes within the motor not being worn in. This is not an issue and over time, this will stop occurring - it's caused by friction against the carbon brushes. However, if there are…
Last update: 19/04/2023, 16:27
Can I use RYOBI Multi Tool to remove silicone?
A RYOBI Multi Tool can be used to remove silicone sealant with a compatible blade. We recommend the POWERFIT 52mm 2PC Scraper Blade, which you can purchase separately.
Last update: 19/04/2023, 16:30
RYOBI Multi Tool quick change not working
Remove the battery to ensure no power is provided to the tool. Check for any physical damage to the lever. Clean any debris or material from the lever using a brush as this might be preventing the lever from functioning. Ensure the accessory is…
Last update: 19/04/2023, 16:33
RYOBI Multi Tool doesn’t have enough power
Multi-Functional Tool power
Last update: 18/07/2022, 16:23
Product Safety Recall Airwave 2-in-1 C1 Brad Nailer/Stapler RA-NBS1832-S
The product that is the subject of the recall is the RYOBI RA-NBS1832-S Airwave 2-in-1 C1 Brad Nailer/Stapler. The Product has been sold through Bunnings retailers throughout Australia from 1 October 2021 – 31 March 2024. Affected products will…
Last update: 20/05/2024, 16:11
RYOBI Airwave/Pneumatic Brad Nailer doesn't fire deep enough
If your RYOBI Airwave/Pneumatic Brad Nailer doesn't fire deep enough and the fastener is protruding, increase the air pressure by increments of 0.5 bar, checking the result after each new adjustment. It is preferred to adjust the depth adjustment…
Last update: 16/03/2023, 14:26
RYOBI Circular Saw won't turn on
Check the blade for obstructions. We also recommend testing your battery to see if there's a fault with battery, rather than the Circular Saw.
Last update: 09/08/2022, 14:32