How can we help?

• Caulking Guns
• Caulking Guns
• Maintenance

How to clean a Ryobi ONE+ Caulking Gun

Before you attempt to clean your Ryobi ONE+ Caulking Gun, remove the battery. We recommend a non-abrasive cleaner, such as mineral spirits. Ensure the spirits have ample time to dry before connecting the battery again.

Last update: 03/02/2023, 15:19

• Caulking Guns
• Caulking Guns
• Troubleshooting

Why is caulk leaking out the back of my Ryobi ONE+ Caulking Gun?

This is most likely caused by a blockage in the nozzle, or the content of the cartridge has dried up. Remove and check the nozzle for blockages using the puncture pin attached to the tool. If the cartridge has a blockage, it means the contents have…

Last update: 20/10/2022, 15:56

• Caulking Guns
• Caulking Guns
• Maintenance

How to prevent the contents of a Ryobi ONE+ Caulking Gun nozzle from drying up

To prevent the contents of a Ryobi ONE+ Caulking Gun nozzle from drying up, insert a long flat head nail into the nozzle. Wrap the tip tightly with electrical tape or similar. It's important to keep the cartridge airtight, as it will cure any…

Last update: 20/10/2022, 16:02

• Caulking Guns
• Caulking Guns
• Application

What speed setting to use for a Ryobi ONE+ Caulking Gun

It’s recommended you start with the slowest speed setting. Then practice applying the caulk on scrap material. The right speed setting will vary on several factors including viscosity of the contents, the size of the nozzle opening, what your…

Last update: 20/10/2022, 16:10

• Grinders
• Angle Grinders
• Getting Started

What size battery is recommended for a RYOBI Angle Grinder?

Cordless Angle Grinders are powerful, energy-hungry tools and, hence, need lots of battery power.  Grinding tasks generally use more battery than cutting tasks, so as a minimum, it’s recommended to use a 4.0Ah battery or higher for optimum runtime…

Last update: 13/09/2024, 10:31

• Grinders
• Angle Grinders
• Application

Can I use a larger disc size with my RYOBI Angle Grinder?

Don’t use a disc larger than the maximum cutting capacity outlined below and in the product user manual, as a larger disc can cause damage to the tool, and potentially harm you or a bystander.

Last update: 13/09/2024, 11:06

• Grinders
• Angle Grinders
• Application

Do I need a spanner to remove the locking nut & disc from a RYOBI Angle Grinder?

For RYOBI Angle Grinders with a tool-free locking nut, these models come fitted with a tool-free blade change nut referred to as a FixTec Locking Nut, which eliminates the need for a pin spanner. 

Last update: 13/09/2024, 11:30