8 Matching results
Silicon is running out of RYOBI Caulking Gun tube & fouling
This can happen if the hole that the silicone is being forced out of is too small and the gun’s setting is too high. Generally, the rule of thumb is that the smaller the hole, the lower the setting needs to be on the gun.
Last update: 10/07/2023, 17:16
How to remove the cartridge from a Ryobi ONE+ Caulking Gun
Remove the battery from the Caulking Gun. Then pull back on the handle at the back of the Caulking Gun releasing the plunger from inside the cartridge. Now the cartridge will be able to be removed.
Last update: 20/10/2022, 15:40
Why is caulk leaking out the back of my Ryobi ONE+ Caulking Gun?
This is most likely caused by a blockage in the nozzle, or the content of the cartridge has dried up. Remove and check the nozzle for blockages using the puncture pin attached to the tool. If the cartridge has a blockage, it means the contents have…
Last update: 20/10/2022, 15:56
RYOBI Hedge Trimmer blades not cutting or getting jammed
If your RYOBI Hedge Trimmer Blade isn’t cutting or is getting jammed, your blades may need maintenance. Lubrication is required to keep the friction between the blades low to prevent excess heat.
Last update: 13/07/2023, 16:20
What to do if your RYOBI Hedge Trimmer blades are sticking
If your Hedge Trimmer blades are sticking, clean the blades with a dry brush or cloth. You should also ensure blades are lubricated before and after every use, as this helps to clean off sticky material, like sap.
Last update: 20/09/2022, 15:57
What to do if your RYOBI Hedge Trimmer cuts out
If your RYOBI Hedge Trimmer cuts out, the material being cut may be too thick. Check your Hedge Trimmer’s maximum cut capacity.
Last update: 20/09/2022, 15:58
How to clean RYOBI Hedge Trimmer cutting bar
To clean the cutting bar of your Hedge Trimmer, clean the blades with a dry brush or cloth. Lubricating the blades will also help to clean off sticky material, like sap. Lubricate the blades with a plant-friendly lubricant. Then run the unit to help…
Last update: 15/09/2022, 10:44