6 Matching results
Silicon is running out of RYOBI Caulking Gun tube & fouling
This can happen if the hole that the silicone is being forced out of is too small and the gun’s setting is too high. Generally, the rule of thumb is that the smaller the hole, the lower the setting needs to be on the gun.
Last update: 10/07/2023, 17:16
How to remove the cartridge from a Ryobi ONE+ Caulking Gun
Remove the battery from the Caulking Gun. Then pull back on the handle at the back of the Caulking Gun releasing the plunger from inside the cartridge. Now the cartridge will be able to be removed.
Last update: 20/10/2022, 15:40
Why is caulk leaking out the back of my Ryobi ONE+ Caulking Gun?
This is most likely caused by a blockage in the nozzle, or the content of the cartridge has dried up. Remove and check the nozzle for blockages using the puncture pin attached to the tool. If the cartridge has a blockage, it means the contents have…
Last update: 20/10/2022, 15:56
RYOBI Heat Gun won't heat up
If your RYOBI Heat Gun won't heat up, after turning it on, make sure you've allowed enough time for the gun to prepare itself - as the unit takes 1-2 minutes to heat up. If your Heat Gun is still not reaching the proper temperature, you may need to…
Last update: 12/08/2022, 11:03
RYOBI Heat Gun won't turn on
If your RYOBI Heat Gun won't turn on, check the power outlet is working, ensure the plug is firmly plugged into the power outlet and untangle any knot on the power cord. You should also check your extension lead - make sure that extension leads with…
Last update: 11/08/2022, 10:41
RYOBI Heat Gun is cutting out
If your RYOBI Heat Gun is cutting out, check if the plug of the unit is firmly plugged in, untangle any knot on the cord, and ensure the nozzle of the unit isn't too close to the heating surface and causing it to overheat. You should also check if…
Last update: 10/08/2022, 13:02