28 Matching results
Can’t remove cutting disc from Angle Grinder
Typically, a cutting disc can be hard to remove because the locking nut was overtightened when fitted to the grinder. A disc will tighten under loading, so excessive tightening will cause issues with removal, that may require a pin spanner or wrench…
Last update: 01/08/2023, 11:27
How to fit a guard to a RYOBI Angle Grinder
It is important that the grinder is always used with a guard fitted, and (if included in your model) the additional clip-on guard if you are cutting. To fit the guard, place the guard on the grinder housing with the grooves aligned (arrow…
Last update: 11/08/2023, 15:29
What size disc is suitable for a RYOBI Angle Grinder?
For a RYOBI 125mm Angle Grinder, the maximum disc capacity is 125mm/5 inches, so you need a 125mm disc. For a RYOBI 115mm Angle Grinder, the maximum disc capacity is 115m, so you need a 115mm disc. Don’t use a disc larger than the maximum cutting…
Last update: 02/08/2023, 10:07
What does a RYOBI Thicknesser do?
A Thicknesser, also known as a Planer-Thicknesser is essentially a benchtop version of a hand planer. It’s used to plane wood to a consistent thickness throughout its length. They can also be used to square off posts while at the same time removing…
Last update: 02/09/2022, 16:48
How to setup a RYOBI Thickness Planer & prepare for use
Other than fitting the height adjustment handle and opening the support tables, a RYOBI Thickness Planer (also known as a Thicknesser) is fully assembled. Thicknessers are very heavy, so it’s important to mount them either securely to a bench or…
Last update: 29/08/2023, 09:53
How to clean & maintain a RYOBI Thickness Planer
RYOBI Thickness Planers (also known as a Thicknesser) produce a lot of sawdust and chips very quickly, which means they can also clog up quickly without any form of dust collection. So, it’s important to clear the machine of built-up sawdust as you…
Last update: 02/09/2022, 16:50
How to feed timber using a RYOBI Thickness Planer
To feed timber into a RYOBI Thickness Planer (also known as a Thicknesser), at the front of the machine, there's a sealed power switch with emergency stop button. To turn it on, unclip and lift the cover, press the green button, and rest the cover…
Last update: 29/08/2023, 09:47