![TTI Brands Home](/themes/custom/tti/images//icons/logo.png)
13 Matching results
Can’t remove cutting disc from Angle Grinder
Typically, a cutting disc can be hard to remove because the locking nut was overtightened when fitted to the grinder. A disc will tighten under loading, so excessive tightening will cause issues with removal, that may require a pin spanner or wrench…
Last update: 01/08/2023, 11:27
How to fit a guard to a RYOBI Angle Grinder
It is important that the grinder is always used with a guard fitted, and (if included in your model) the additional clip-on guard if you are cutting. To fit the guard, place the guard on the grinder housing with the grooves aligned (arrow…
Last update: 11/08/2023, 15:29
What size disc is suitable for a RYOBI Angle Grinder?
For a RYOBI 125mm Angle Grinder, the maximum disc capacity is 125mm/5 inches, so you need a 125mm disc. For a RYOBI 115mm Angle Grinder, the maximum disc capacity is 115m, so you need a 115mm disc. Don’t use a disc larger than the maximum cutting…
Last update: 02/08/2023, 10:07
RYOBI Airwave/Pneumatic Brad Nailer doesn't fire deep enough
If your RYOBI Airwave/Pneumatic Brad Nailer doesn't fire deep enough and the fastener is protruding, increase the air pressure by increments of 0.5 bar, checking the result after each new adjustment. It is preferred to adjust the depth adjustment…
Last update: 16/03/2023, 14:26
Why does my RYOBI Petrol/Battery Cultivator vibrate excessively when in use?
If your cultivator vibrates excessively when in use, apply a small amount of general-purpose grease to the non-powered drive shaft to ensure a smooth operation.
Last update: 20/09/2022, 14:59
How to stop RYOBI Petrol/Battery Cultivator cutting out
If your RYOBI Cultivator keeps cutting out while in use, ensure the soil conditions are suited to your cultivator. If your model is 18V & 36V Battery, ensure that your battery is sufficiently charged before use. If your model is petrol, make sure…
Last update: 20/09/2022, 15:00