Airwave 15Ga Da Brad Nailer (RA-NBA1564-K)

Before troubleshooting a nailer, always disconnect it from the air supply and keep the tool pointed away from yourself and others. Begin by checking that the magazine is properly loaded and that the correct nail gauge is being used for your specific…

Proper fastener depth adjustment ensures clean, secure results when using a brad nailer. If nails are not driven flush, gradually increase air pressure in small increments or fine-tune the drive depth using the adjustment knob. Required pressure may…

Adjusting fastener driving depth ensures accurate and secure fastening. Always test on a scrap piece before starting your project. For pneumatic nailers, driving depth can be adjusted by changing the air pressure using the adjustment dial on the…

Before clearing a jam, always disconnect the brad nailer from the air supply and keep it pointed away from yourself and others. To remove a jammed nail, unload all fasteners, open the jam release latch, and use a flat-blade screwdriver to push the…

Always disconnect the nailer from the air supply and keep it pointed away from others before troubleshooting. Check that the magazine is loaded and that you are using the correct nail gauge and size for your specific model. Clear any nail jams by…