18V ONE+ HP™ Brushless Compact Hammer Drill - Tool Only (RPD18C)

Find out whether a Ryobi 18V ONE+ Drill can drill through concrete, metal, timber, or tile, and which models are best for masonry work. Learn when to use drill mode vs hammer mode and how choosing the correct drill bit and setting ensures safe,…

Check that the chuck securing screw has potentially loosened – tighten clockwise with a matching bit (PH3 or Torx T30 usually) This occurs when Bits are dropped all the way into the bottom of the chuck.

The most common driver bit type is a Phillips Head or PH2 Driver Bit (a four-pointed star). Most commonly there will be a selection of Driver bits with different head types available to purchase.

A Hammer Drill is a lightweight all-rounder that is great for light masonry work while a Rotary Hammer Drill is a heavier drill designed for Drilling into solid concrete and re-enforced concrete.

Drill Drivers do not have a safety clutch for core drilling.

The Drill Bit may have dust or liquid on the Bit, which might cause it to slip - this can be prevented by cleaning the end of the Drill Bit that goes into the chuck.

Learn how to attach a drill bit to a drill or impact driver, including step-by-step instructions for a Ryobi 18V ONE+ Drill Driver and ¼" hex impact drivers. Follow this easy guide to safely insert, secure, and test your drill bit using a…

Learn how to change a drill bit on a Ryobi 18V ONE+ Drill quickly and safely with this step-by-step guide, including how to use the keyless chuck for easy bit installation. Follow simple instructions for removing and replacing drill bits, tightening…

Learn how to change the drill bit on a Ryobi 18V ONE+ Drill with this simple step-by-step guide covering safe removal and installation using the keyless chuck. Follow clear instructions on loosening, inserting, tightening, and testing your drill bit…

Learn how to insert and remove drill bits in a Ryobi 18V ONE+ Drill safely and efficiently with this step-by-step guide. Discover how to use the keyless chuck for quick bit changes, proper tightening, and secure operation for reliable drilling and…

Learn how to put a drill bit or screwdriver bit into a Ryobi 18V ONE+ Drill with this easy step-by-step guide using the keyless chuck for quick, tool-free changes. Follow simple safety tips and clear instructions for inserting, tightening, testing,…

Learn how to remove a drill bit from a Ryobi 18V ONE+ Drill safely and easily with this simple step-by-step guide. Follow clear instructions on loosening the keyless chuck, handling hot or sharp bits, and ensuring safe, tool-free bit removal.

ALWAYS disconnect the tool from power before starting. You will need a PH3 Screwdriver, a 10-13mm Allen key & a Rubber Mallet. To start, locate the internal screw within the centre of the Drill chuck.

Check that the Drill may is set on the correct drill or driving settings, the speed may be too high/ low, in reverse instead of forward, or the Adjustable clutch may not be set to the Drill mode (when drilling.) Generally, Slower the speed, the more…

The chuck might have debris in the jaws, which could make adjusting the chuck harder or stiff. Open the chuck fully and clean out any build-up of dirt and dust - preferably with compressed air.

If your RYOBI Drill Driver has low or no power, first check the battery charge and ensure it is properly charged or swapped if needed. Confirm the drill is set to the correct mode, speed, and clutch setting, and that you are using the appropriate,…