Search - RYOBI Support Australia

Grinders
Bench Grinders
Application

Can you put a steel/wire brush on a RYOBI Bench Grinder?

Yes, you can put a steel/wire brush on your Bench Grinder. Make sure its diameter matches that of our recommended and existing Disc & Bore size, and that the RPM capability of the new Steel/Wire Brush is also rated to handle the RPM of the Ryobi…

Last update: 13/04/2023, 14:35

Drills & Drivers
Drills
Troubleshooting

RYOBI Drill has no power or is losing power

Check the battery charge level – it is normal that a battery will lose some minor power output as the charge level drops. If the charge level is too low, the tool may stop under load. In this case you may need to charge your battery or change…

Last update: 11/09/2024, 12:17

Drills & Drivers
Hammer Drills
Troubleshooting

RYOBI Hammer Drill is permanently in hammer mode

Corded Hammer Drill should have a selector on the top of the tool to engage and disengage the hammer function.

Last update: 11/09/2024, 12:20

Drills & Drivers
Impact Drivers
Troubleshooting

Can’t secure screwdriver bit in RYOBI Impact Driver

If you can't secure the screwdriver bit into your Impact Driver, check inside the spindle where the Bit is inserted to ensure there are no dirt or obstructions embedded inside that prevent the Bit from sitting correctly. Depending on the Impact…

Last update: 13/04/2023, 17:03