How can we help?

• Drills & Drivers
• Impact Drivers
• Troubleshooting

Why is my RYOBI 18V ONE+ Impact Driver stuttering/pulsing?

A RYOBI 18V ONE+ Impact Driver that's stuttering or pulsing when drilling in the reverse direction is normal. This tool has an Auto 'A' mode to drive screws when application specific control is required. The 'A' mode rotates in 6 pulses, moving up…

Last update: 15/09/2023, 14:37

• Grinders
• Angle Grinders
• Troubleshooting

Why does my RYOBI Angle Grinder keep cutting out?

Angle Grinders are commonly equipped with several user safety and tool protection systems, such as overload, over-temperature, and anti- kickback.

Last update: 13/09/2024, 12:14

• Grinders
• Angle Grinders
• Troubleshooting

RYOBI Angle Grinder disc has overtightened and jammed

Not installing the disc correctly can cause the disc to overtighten, and potentially jam the disc.  To avoid this from happening, or to fix this issue and prevent this from happening again, you’ll need to remove and refit the disc: 

Last update: 13/09/2024, 13:20

• Grinders
• Angle Grinders
• Troubleshooting

Can’t remove cutting disc from Angle Grinder

Typically, a cutting disc can be hard to remove because the locking nut was overtightened when fitted to the grinder. A disc will tighten under loading, so excessive tightening will cause issues with removal, that may require a pin spanner or wrench…

Last update: 13/09/2024, 13:29

• LINK Kits
• LINK Kits
• Troubleshooting

Can’t tighten screw into anchor when installing RYOBI LINK

This can occur if a Drill Bit larger than 9mm was used & the hole is too big. The maximum Drill Bit & hole size for the RYOBI LINK Wall Anchors is 9mm.

Last update: 27/09/2023, 14:53

• Power Saws
• Mitre Saws
• Troubleshooting

RYOBI Dual Bevel Sliding Mitre Saw handle is jammed

Its possible the saw handle was pulled down or up with its locking pin not fully in or out and is now obstructing the movement. Check the pin is correctly positioned.

Last update: 13/09/2024, 09:45

• Power Saws
• Mitre Saws
• Troubleshooting

RYOBI Dual Bevel Sliding Mitre Saw handle won't move

If the saw doesn’t move or move freely, don’t force it as it could damage the tool. Check the handle locking pin is either fully out or fully in place.

Last update: 10/09/2024, 12:23