13 Matching results
How to avoid poor/no suction with a RYOBI Wet & Dry Vacuum
If your RYOBI Wet & Dry Vacuum has poor or no suction, it may be because the filter is dirty and needs to be cleaned. It could also be because the filter is too old to be cleaned, and needs to be replaced. We also recommend you check and empty the…
Last update: 03/02/2023, 11:44
How to swap out your RYOBI Wet & Dry Vacuum filter
To swap out the filter that's used for dry pickup for the one used for wet, simply take it off and grab the foam filter designed for wet pickup and slide it over. Make sure you place it on nice and firm so it protects all the insides. If you use the…
Last update: 19/09/2022, 16:43
How to clean your RYOBI Wet & Dry Vacuum & filter
We recommend straight after you use your machine for wet vacuuming, to clean it and have it setup ready for next time - particularly if the next time is to use the dry feature. The first step is to drain all the water out and then wipe and clean the…
Last update: 26/09/2022, 11:41
Why is my RYOBI Drill Driver slow to drill into brick?
To drill into brick, make sure you’re using a RYOBI Drill with a hammer function. Select this mode and use a Masonry Drill Bit. You can improve the drilling speed by selecting a high gear (commonly gear 2 – where possible) - this is usually located…
Last update: 31/01/2023, 13:20
What size battery is recommended for a RYOBI Angle Grinder?
Cordless Angle Grinders are powerful tools that need lots of battery power. Grinding applications generally use more battery than cutting, so as a minimum, it’s recommended to use a 4.0ah battery or higher for optimum runtime and performance.
Last update: 11/08/2023, 14:59
Can I use a larger disc size with my RYOBI Angle Grinder?
Don’t use a disc larger than the maximum cutting capacity outlined below, as a larger disc can cause damage to the tool, and potentially harm you or a bystander. For a RYOBI 125mm Angle Grinder, the maximum disc capacity is 125mm/5 inches. For a…
Last update: 11/08/2023, 15:33
Do I need a spanner to remove the locking nut & disc from a RYOBI Angle Grinder?
For RYOBI Angle Grinders with a tool free locking nut, these models comes fitted with a tool free blade change nut referred to as a FixTec Locking Nut, which eliminates the need for a pin spanner. The Fix-tec nut also helps prevent overtightening,…
Last update: 11/08/2023, 15:41