5 Matching results
How to swap out your RYOBI Wet & Dry Vacuum filter
To swap out the filter that's used for dry pickup for the one used for wet, simply take it off and grab the foam filter designed for wet pickup and slide it over. Make sure you place it on nice and firm so it protects all the insides. If you use the…
Last update: 19/09/2022, 16:43
Can I use a larger disc size with my RYOBI Angle Grinder?
Don’t use a disc larger than the maximum cutting capacity outlined below, as a larger disc can cause damage to the tool, and potentially harm you or a bystander. For a RYOBI 125mm Angle Grinder, the maximum disc capacity is 125mm/5 inches. For a…
Last update: 11/08/2023, 15:33
Do I need a spanner to remove the locking nut & disc from a RYOBI Angle Grinder?
For RYOBI Angle Grinders with a tool free locking nut, these models comes fitted with a tool free blade change nut referred to as a FixTec Locking Nut, which eliminates the need for a pin spanner. The Fix-tec nut also helps prevent overtightening,…
Last update: 11/08/2023, 15:41
How to fit & remove Angle Grinder disc using tool free locking nut
These instructions apply to RYOBI Angle Grinders with a tool free locking nut (FIXTEC). The locking nut will have a small tab to one side of the centre thread that can flip up, to help lever the locking nut on or off.
Last update: 29/08/2023, 13:18
What size disc is suitable for a RYOBI Angle Grinder?
For a RYOBI 125mm Angle Grinder, the maximum disc capacity is 125mm/5 inches, so you need a 125mm disc. For a RYOBI 115mm Angle Grinder, the maximum disc capacity is 115m, so you need a 115mm disc. Don’t use a disc larger than the maximum cutting…
Last update: 02/08/2023, 10:07