How can we help?

• Blowers & Garden Vacuums
• Leaf Blowers
• Troubleshooting

What to do if 18V or 36V RYOBI Blower doesn't work

First remove and reinsert the battery to ensure that it’s seated properly in the Blower. If this doesn’t work, check the battery charge level by pushing the battery indicator button.

Last update: 14/07/2023, 11:04

• Drills & Drivers
• Drill Drivers
• Troubleshooting

Cannot tighten Drill Driver Bit in RYOBI Drill Driver chuck

Check that the chuck securing screw has potentially loosened – tighten clockwise with a matching bit (PH3 or Torx T30 usually) This occurs when Bits are dropped all the way into the bottom of the chuck.

Last update: 11/09/2024, 16:11

• Drills & Drivers
• Drills
• Troubleshooting

RYOBI Drill has no power or is losing power

Check the battery charge level – it is normal that a battery will lose some minor power output as the charge level drops. If the charge level is too low, the tool may stop under load. In this case you may need to charge your battery or change…

Last update: 11/09/2024, 12:17

• Drills & Drivers
• Drill Drivers
• Troubleshooting

RYOBI Cordless Drill Driver cutting out

Check that the Drill may is set on the correct drill or driving settings, the speed may be too high/ low, in reverse instead of forward, or the Adjustable clutch may not be set to the Drill mode (when drilling.) Generally, Slower the speed, the more…

Last update: 11/09/2024, 13:34

• Drills & Drivers
• Drill Drivers
• Troubleshooting

Drill Bits slip in RYOBI Drill Driver chuck

The Drill Bit may have dust or liquid on the Bit, which might cause it to slip - this can be prevented by cleaning the end of the Drill Bit that goes into the chuck.

Last update: 11/09/2024, 16:12

• Drills & Drivers
• Drill Drivers
• Troubleshooting

RYOBI Drill Driver chuck hard to adjust

The chuck might have debris in the jaws, which could make adjusting the chuck harder or stiff. Open the chuck fully and clean out any build-up of dirt and dust - preferably with compressed air.

Last update: 11/09/2024, 16:18

• Drills & Drivers
• Drill Drivers
• Troubleshooting

RYOBI Drill Driver lacks power

Check the battery charge level – it is normal that a battery will lose some minor power output as the charge level drops. If the charge level is too low, the tool may stop under load. In this case you may need to charge your battery or change…

Last update: 11/09/2024, 16:29