21 Matching results
What to do if your RYOBI 18V HP Garden Vacuum & Sweeper suddenly stops
If your RYOBI 18V HP Garden Vacuum and Sweeper suddenly stops, at the top of the handle there is a red LED - if this blinks, it means the locking pin hasn’t been fully tightened. If this happens, check that the pin is finger-tight until the LED goes…
Last update: 13/10/2022, 13:20
Can I suck up wet leaves with my RYOBI 18V HP Garden Vacuum & Sweeper?
You should avoid vacuuming leaves that are wet. Wait until they've dried out as they are much harder to suck up and will consume lots of battery runtime. Wet leaves also tend to clog up in the tube, reducing air flow and over time will degrade the…
Last update: 13/10/2022, 14:16
How to prevent & clear blockages in a RYOBI 18V HP Garden Vacuum & Sweeper
To prevent blockages, it’s a good idea to avoid vacuuming leaves that are wet. Wait until they have dried out as they can be problematic. For starters, they are much harder to suck up, consuming lots of battery runtime. They tend to clog up in the…
Last update: 13/10/2022, 14:24
Why does my RYOBI 18V HP Garden Vacuum & Sweeper have poor suction?
This could be caused by a blockage in the tube. To check and clear this, first remove the battery. Then remove the main tube and check for any small sticks that might be stuck inside by looking through the tube. These are a common cause of leaves…
Last update: 13/10/2022, 14:32
How to clean the collection bag of a RYOBI 18V HP Garden Vacuum & Sweeper
To clean the collection bag of a RYOBI 18V HP Garden Vacuum & Sweeper, turn the bag inside-out and remove the plastic sleeve. With your garden hose, give it a light spray. Hang it out to dry before using it again.
Last update: 03/02/2023, 15:19
What PPE is recommended when using a RYOBI 18V HP Garden Vacuum & Sweeper
When using a RYOBI 18V HP Garden Vacuum & Sweeper, we recommend eye and ear protection and gloves when your performing maintenance and emptying the collection bag.
Last update: 13/10/2022, 15:33
RYOBI battery-powered Nailer or Stapler doesn’t fire deep enough
If you find your nails don't fire deep enough or your brads aren't flush, try the following: Check the battery to ensure there’s enough charge (at least 2 bars on the battery fuel gauge). Check the power adjustment dial or switch that is on the back…
Last update: 17/09/2024, 18:50