12 Matching results
12.0AH battery doesn’t work when RYOBI 36V Blower turbo button is pressed
The 12.0Ah HP battery (R36BTY12) isn’t compatible with this Blower model’s turbo function. This is caused by the high output of the HP battery causing the overload protection to activate.
Last update: 29/08/2022, 09:37
What to do if 18V or 36V RYOBI Blower doesn't work
First remove and reinsert the battery to ensure that it’s seated properly in the Blower. If this doesn’t work, check the battery charge level by pushing the battery indicator button.
Last update: 14/07/2023, 11:04
Why is my RYOBI Drill Driver slow to drill into brick?
To drill into brick, make sure you’re using a RYOBI Drill with a hammer function. Select this mode and use a Masonry Drill Bit. You can improve the drilling speed by selecting a high gear (commonly gear 2 – where possible) - this is usually located…
Last update: 31/01/2023, 13:20
What size battery is recommended for a RYOBI Angle Grinder?
Cordless Angle Grinders are powerful tools that need lots of battery power. Grinding applications generally use more battery than cutting, so as a minimum, it’s recommended to use a 4.0ah battery or higher for optimum runtime and performance.
Last update: 11/08/2023, 14:59
Can I use a larger disc size with my RYOBI Angle Grinder?
Don’t use a disc larger than the maximum cutting capacity outlined below, as a larger disc can cause damage to the tool, and potentially harm you or a bystander. For a RYOBI 125mm Angle Grinder, the maximum disc capacity is 125mm/5 inches. For a…
Last update: 11/08/2023, 15:33
Do I need a spanner to remove the locking nut & disc from a RYOBI Angle Grinder?
For RYOBI Angle Grinders with a tool free locking nut, these models comes fitted with a tool free blade change nut referred to as a FixTec Locking Nut, which eliminates the need for a pin spanner. The Fix-tec nut also helps prevent overtightening,…
Last update: 11/08/2023, 15:41
Why does my RYOBI Angle Grinder keep cutting out?
Angle Grinders are commonly equipped with several user safety and tool protection systems, such as overload, over-temperature, and anti- kickback. Consider the following that could be causing the issue: Excess Force, Angle of Application, or a below…
Last update: 11/08/2023, 15:21