10 Matching results
What to do if your RYOBI Lawn Mower isn't catching grass
Firstly, check for blockages. Blockages usually occur in the chute between the mower deck & catcher, which block airflow and prevent grass from being thrown to the back of the catcher. Mowing in wet or unruly conditions are often the cause of this…
Last update: 25/11/2022, 15:09
What to do if your 18V RYOBI Mower won't turn on
If your RYOBI 18V lawn mower won't start, there could be several reasons for the issue. To troubleshoot and potentially resolve the problem, you can follow these steps.
Last update: 16/10/2023, 15:35
How to clean a RYOBI Lawn Mower
For a battery-powered or electric mower, remove the battery and/or red safety key from the lawn mower. Tilt the lawn mower on its side and clean the deck with a brush or cloth. DO NO USE WATER on these products. For a petrol-powered lawn mower, wash…
Last update: 25/11/2022, 14:58
What to do if your 18V or 36V RYOBI Mower is lacking power
To improve the power of your mower, ensure your battery is fully charged, raise your cutting height setting, walk slower, and wait until your lawn fully dries before mowing. An HP battery such as a 6.0Ah or 9.0Ah will improve your mowers…
Last update: 25/11/2022, 15:00
When to change RYOBI Lawn Mower blades
The need to replace your blade will depend on a variety of factors. As a guide, it is advised to visually inspect the condition of your lawn mower blades in between mowing sessions. If you notice chips in the blade, rust or a blunt cutting edge,…
Last update: 25/11/2022, 14:59
What nails, staple types or sizes can I use in a RYOBI Nailer or Stapler?
RYOBI Nailers and Staplers are designed for specific fasteners compatible to these RYOBI tools. Using incorrect-sized fasteners can be dangerous and will result in the tool jamming or breaking - voiding the warranty. Ensure the nails you used are…
Last update: 05/09/2024, 18:31
RYOBI Nailer or Stapler work-contacting element doesn’t fully depress & won’t work
Ryobi Nailers and Staplers are commonly fitted with a line-lockout which prevents the tool from jamming when the nails are low (approximately when there's 5 nails left). If this occurs, replenish the magazine with more nails or staples.
Last update: 10/09/2024, 19:40