7 Matching results
RYOBI Petrol Easy Start Cultivator difficult to start
If you’re having difficulties starting your RYOBI Petrol Easy Start Cultivator, make sure you follow the correct starting procedure. You should also check for a flooded engine, stale fuel, if the air filter needs cleaning, the choke has been left…
Last update: 29/08/2022, 11:25
Why does my RYOBI Petrol/Battery Cultivator vibrate excessively when in use?
If your cultivator vibrates excessively when in use, apply a small amount of general-purpose grease to the non-powered drive shaft to ensure a smooth operation.
Last update: 20/09/2022, 14:59
How to stop RYOBI Petrol/Battery Cultivator cutting out
If your RYOBI Cultivator keeps cutting out while in use, ensure the soil conditions are suited to your cultivator. If your model is 18V & 36V Battery, ensure that your battery is sufficiently charged before use. If your model is petrol, make sure…
Last update: 20/09/2022, 15:00
Tools required to install RYOBI LINK to a plasterboard wall
Make sure you have the following tools to install the RYOBI LINK Wall.
Last update: 27/09/2023, 14:25
How to install RYOBI LINK rail to a plasterboard wall
Step-by-step instructions and a how-to video guide on how to install RYOBI LINK Rail/s on a plasterboard or brick wall.
Last update: 27/09/2023, 14:51
How much weight can RYOBI Link hold?
The LINK Rail supports 94kg overall for each rail or 34kg per 280mm. Overall holding weight varies depending on how the rail is fixed to the wall.
Last update: 27/09/2023, 14:53
Can’t tighten screw into anchor when installing RYOBI LINK
This can occur if a Drill Bit larger than 9mm was used & the hole is too big. The maximum Drill Bit & hole size for the RYOBI LINK Wall Anchors is 9mm.
Last update: 27/09/2023, 14:53