SEARCH results
28 Matching results
Why can't I pull my Petrol RYOBI Pole Pruner starter cord?
If your pull cord can't be pulled, the engine may have seized. This is caused by the fuel mixture being incorrect and having a lack of oil to lubricate the motor. Ryobi chainsaws run off a 50:1 ratio, this means 50 parts unleaded fuel to 1 part 2…
Last update: 20/09/2022, 14:47
RYOBI Petrol Pole Pruner hard to start/doesn’t run correctly
If your RYOBI Pole Pruner is hard to start or doesn't run correctly, make sure you're starting the chainsaw correctly. It may also be a flooded engine, which can prevent a chainsaw from starting. A flooded engine means there is excessive fuel pumped…
Last update: 20/09/2022, 14:47
RYOBI battery-powered Nailer or Stapler doesn’t fire deep enough
If you find your nails don't fire deep enough or your brads aren't flush, try the following: Check the battery to ensure there’s enough charge (at least 2 bars on the battery fuel gauge). Check the power adjustment dial or switch that is on the back…
Last update: 17/09/2024, 18:50
What nails, staple types or sizes can I use in a RYOBI Nailer or Stapler?
RYOBI Nailers and Staplers are designed for specific fasteners compatible to these RYOBI tools. Using incorrect-sized fasteners can be dangerous and will result in the tool jamming or breaking - voiding the warranty. Ensure the nails you used are…
Last update: 05/09/2024, 18:31
What battery is best to use with a RYOBI Nailer or Stapler?
The recommended battery for all Fastener tools is the RYOBI 18V ONE+ Compact 4.0AH Battery (RB1840C) it has a good balance of power, runtime, and weight. However, any battery from the RYOBI ONE+ range is suitable. Just note that higher capacity…
Last update: 10/09/2024, 19:10
Does the 18V ONE+ HP Brushless 30-34° Framing Nailer need air after unboxing?
The 18V ONE+ HP Brushless 30-34° Framing Nailer doesn’t need air when you take it out of the packaging. It’s ready to go straight out of the box.
Last update: 11/09/2024, 12:39
What type & size nails are suitable for the 18V ONE+ HP Brushless 30-34° Framing Nailer?
For the 18V ONE+ HP Brushless 30-34° Framing Nailer, it’s recommended to only use framing nails. However, you can use any brand of nails as long as they are 10GA 30-34° type, with lengths ranging from 50mm to 90mm, and feature either smooth or ring…
Last update: 11/09/2024, 12:55
Additional Support
MY RYOBI
PRODUCT MANUALS
WARRANTY
WHERE TO BUY
SAFETY NOTICES
