8 Matching results
RYOBI battery-powered Nailer or Stapler doesn’t fire deep enough
If you find your nails don't fire deep enough or your brads aren't flush, try the following troubleshooting steps: Check the battery to ensure there’s enough charge (at least 2 bars on the battery fuel gauge). Check the power adjustment dial or…
Last update: 16/03/2023, 11:33
RYOBI Nailer or Stapler work-contacting element doesn’t fully depress & won’t work
Ryobi Nailers and Staplers are commonly fitted with a line-lockout which prevents the tool from jamming when the nails are low (approximately when there's 5 nails left). If this occurs, replenish the magazine with more nails or staples. Otherwise,…
Last update: 10/07/2023, 17:27
How to clear a jammed RYOBI battery-powered Nailer or Stapler
If your RYOBI Nailer has a jammed nail, disconnect the Battery from the tool and remove the nails that aren’t jammed from the tool magazine, which takes the pressure off the jammed nail. Pull up on the latch at the nose of the tool and open the jam…
Last update: 10/07/2023, 17:31
RYOBI Edger not making clean defined edge
If your RYOBI Edger isn’t making a clean defined edge, check the condition of your blade and the depth you have set the blade set to. You should also check the locking nut is secured.
Last update: 25/08/2022, 13:55
What to do if RYOBI Edger blade doesn't spin
If your RYOBI Edger blade isn’t spinning while in use, consider raising the height of the blade in order to reduce the strain on the edger. You should also try starting the Edger slightly out of the grass and drop in to position and cut at a steady…
Last update: 20/09/2022, 10:18
What to do if RYOBI Edger won't start
If your RYOBI Edger isn’t starting, for battery models, check the battery has charge by pressing the fuel gauge. For AC models, turn the power point switch off and check the cord is inserted correctly. You should also check the coupler connection…
Last update: 20/09/2022, 10:20
What to do if your RYOBI Edger isn't cutting properly
If your RYOBI Edger isn’t cutting properly, check the condition of your blade and raise the height of the blade to reduce the strain on the edger. For 18V or 36V battery, check the battery has charge by pressing the fuel gauge. For AC, turn off the…
Last update: 20/09/2022, 10:21