8 Matching results
RYOBI Brad Nailer Brads aren’t flush
The driving depth of the fastener may need to be adjusted. Test the depth on a scrap workpiece to determine the required depth for the application. To determine depth of drive, adjust the air pressure on the tool by rotating the dial on the back of…
Last update: 16/03/2023, 11:20
RYOBI Brad Nailer jamming
It's likely a jammed fastener - disconnect the air hose to remove the jammed fastener. Additionally, always ensure the correct gauge of nails is being used, and check the nails are straight and in condition.
Last update: 08/08/2022, 16:38
RYOBI Airwave/Pneumatic Brad Nailer doesn't fire deep enough
If your RYOBI Airwave/Pneumatic Brad Nailer doesn't fire deep enough and the fastener is protruding, increase the air pressure by increments of 0.5 bar, checking the result after each new adjustment. It is preferred to adjust the depth adjustment…
Last update: 16/03/2023, 14:26
What to do if your RYOBI Shredder has stopped working
If your RYOBI Shredder stopped working, the chute may be blocked by debris – unplug the unit and clear the blockage. Also, check if the circuit breaker is overloaded.
Last update: 29/08/2022, 11:44
What to do if your RYOBI Shredder is low on power
Your RYOBI Shredder may be low on power if you’re using too many extension leads or a lead that is too long. It’s recommended to use a heavy-duty extension lead no longer than 25m.
Last update: 30/08/2022, 08:27
Troubleshoot RYOBI 36V Power Station that won’t turn on
If your RYOBI 36V Power Station Inverter won’t turn on, check that the battery has been fully charged before using your Inverter. Make sure to press and hold the main power button for 2 seconds.
Last update: 15/09/2022, 11:44
Troubleshoot RYOBI 36V Power Station plug that stops working
If your RYOBI 36V Power Station AC 240V plug doesn’t work, press and hold the AC button for at least two seconds to turn on the Inverter. Alternatively, your Inverter may be overloaded. Disconnect the device and reset your Inverter.
Last update: 15/09/2022, 11:47