5 Matching results
RYOBI Brad Nailer not firing or is misfiring
Remove battery for inspecting the tool. Check if there are fasteners in the magazine by dislodging the magazine latch and inspecting it. Ensure the correct gauge nails for the Nailer are being used. Check for any jams. In the event of a jam, open…
Last update: 06/02/2023, 18:27
RYOBI Airwave/Pneumatic Brad Nailer doesn't fire deep enough
If your RYOBI Airwave/Pneumatic Brad Nailer doesn't fire deep enough and the fastener is protruding, increase the air pressure by increments of 0.5 bar, checking the result after each new adjustment. It is preferred to adjust the depth adjustment…
Last update: 16/03/2023, 14:26
What to do if your RYOBI Shredder has stopped working
If your RYOBI Shredder stopped working, the chute may be blocked by debris – unplug the unit and clear the blockage. Also, check if the circuit breaker is overloaded.
Last update: 29/08/2022, 11:44
What to do if your RYOBI Shredder is low on power
Your RYOBI Shredder may be low on power if you’re using too many extension leads or a lead that is too long. It’s recommended to use a heavy-duty extension lead no longer than 25m.
Last update: 30/08/2022, 08:27
Why is my RYOBI Drill Driver slow to drill into brick?
To drill into brick, make sure you’re using a RYOBI Drill with a hammer function. Select this mode and use a Masonry Drill Bit. You can improve the drilling speed by selecting a high gear (commonly gear 2 – where possible) - this is usually located…
Last update: 31/01/2023, 13:20