9 Matching results
RYOBI Brad Nailer not firing or is misfiring
Remove battery for inspecting the tool. Check if there are fasteners in the magazine by dislodging the magazine latch and inspecting it. Ensure the correct gauge nails for the Nailer are being used. Check for any jams. In the event of a jam, open…
Last update: 06/02/2023, 18:27
RYOBI Airwave/Pneumatic Brad Nailer doesn't fire deep enough
If your RYOBI Airwave/Pneumatic Brad Nailer doesn't fire deep enough and the fastener is protruding, increase the air pressure by increments of 0.5 bar, checking the result after each new adjustment. It is preferred to adjust the depth adjustment…
Last update: 16/03/2023, 14:26
12.0AH battery doesn’t work when RYOBI 36V Blower turbo button is pressed
The 12.0Ah HP battery (R36BTY12) isn’t compatible with this Blower model’s turbo function. This is caused by the high output of the HP battery causing the overload protection to activate.
Last update: 29/08/2022, 09:37
What to do if 18V or 36V RYOBI Blower doesn't work
First remove and reinsert the battery to ensure that it’s seated properly in the Blower. If this doesn’t work, check the battery charge level by pushing the battery indicator button.
Last update: 14/07/2023, 11:04
RYOBI Edger not making clean defined edge
If your RYOBI Edger isn’t making a clean defined edge, check the condition of your blade and the depth you have set the blade set to. You should also check the locking nut is secured.
Last update: 25/08/2022, 13:55
What to do if RYOBI Edger blade doesn't spin
If your RYOBI Edger blade isn’t spinning while in use, consider raising the height of the blade in order to reduce the strain on the edger. You should also try starting the Edger slightly out of the grass and drop in to position and cut at a steady…
Last update: 20/09/2022, 10:18
What to do if RYOBI Edger won't start
If your RYOBI Edger isn’t starting, for battery models, check the battery has charge by pressing the fuel gauge. For AC models, turn the power point switch off and check the cord is inserted correctly. You should also check the coupler connection…
Last update: 20/09/2022, 10:20