6 Matching results
Product Safety Recall Airwave 2-in-1 C1 Brad Nailer/Stapler RA-NBS1832-S
The product that is the subject of the recall is the RYOBI RA-NBS1832-S Airwave 2-in-1 C1 Brad Nailer/Stapler. The Product has been sold through Bunnings retailers throughout Australia from 1 October 2021 – 31 March 2024. Affected products will…
Last update: 20/05/2024, 16:11
RYOBI Airwave/Pneumatic Brad Nailer doesn't fire deep enough
If your RYOBI Airwave/Pneumatic Brad Nailer doesn't fire deep enough and the fastener is protruding, increase the air pressure by increments of 0.5 bar, checking the result after each new adjustment. It is preferred to adjust the depth adjustment…
Last update: 16/03/2023, 14:26
How to purge & clean a RYOBI Garden Sprayer tank after use
To purge & clean RYOBI Garden Sprayer tank after use, first remove the battery pack. Then drain the chemicals into a container. Fill the tank with clean water - a small amount of mild detergent can be used to assist with cleaning out the tank. Re…
Last update: 06/10/2023, 11:15
How to lock & unlock a RYOBI 210MM Compound Mitre Saw's handle
The RYOBI 1200W 210MM Compound Mitre Saw handle is locked down with a pin located on the right. To unlock the handle, pull down the handle and hold it there. Pull the locking pin all the way out. Slowly bring up the saw handle and then check it…
Last update: 13/09/2023, 10:48
RYOBI 210MM Compound Mitre Saw handle is jammed
If your RYOBI 1200W 210MM Compound Mitre Saw's handle is jammed, its possible the saw handle was pulled down or up with its locking pin not fully in or out and is now obstructing the movement. Check that the locking pin is correctly positioned…
Last update: 13/09/2023, 10:52
RYOBI 210MM Compound Mitre Saw handle won't move
If your RYOBI 1200W 210MM Compound Mitre Saw handle won't move up or down freely, don't force it as it can damage the tool. It's likely the locking pin isn't fully in or out, and is now obstructing movement. Check that the locking pin is correctly…
Last update: 13/09/2023, 10:51